Comprehensive Mechanism for CO Electroreduction on Dual-Atom-Catalyst-Anchored N-Doped Graphene

Carbon neutrality has drawn increasing attention for realizing the carbon cyclization and reducing the greenhouse effect. Although the C1 products, such as CO, can be achieved with a high Faraday efficiency, the targeted production of C2 fuels as well as the mechanism have not been systematically investigated. In this work, we carry out a first-principles study to screen dual-atom catalysts (DACs) for producing C2 fuels through the electrocatalytic carbon monoxide reduction reaction (e-CORR). We find that methanol, ethanol and ethylene can be produced on both DAC−Co and DAC−Cu, while acetate can be achieved on DAC−Cu only. Importantly, methanol and ethylene are preferred on DAC−Co, while acetate and ethylene on DAC−Cu. Furthermore, we show that the explicit solvent can enhance the adsorption and influence the protonation steps, which subsequently affects the protonation and dimerization behavior as well as the performance and selectivity of e-CORR on DACs. We further demonstrate that the C−C coupling is easy to be formed and stabilized if the Integrated Crystal Orbital Hamilton Population (ICOHP) is low because of the low energy barrier. Our findings provide not only guidance on the design of novel catalysts for e-CORR, but an insightful understanding on the reduction mechanism.     

A Golgi Apparatus-Targetable Probe Based on Lanthanide Complexes for Ratiometric Time-Gated Luminescence Detection of Hydrogen Sulfide

Development of bioanalytical methods for selective and accurate detection of H₂S in living samples is essential for understanding the pathological and physiological functions of this gasotransmitter in biological systems. Here we report a Golgi apparatus-targetable lanthanide complex-based luminescent probe, Golgi-ABTTA-Eu³⁺/Tb³⁺, that can be used for accurately determining H₂S in aqueous solution and living cells via the ratiometric time-gated luminescence (RM-TGL) technique. This probe is composed of 2,2′:6′,2′′-terpyridine-Eu³⁺/Tb³⁺ mixed complexes as the luminophore, 4-azidobenzyl-ether as the responsive moiety, and sulfanilamide as the Golgi apparatus-targeting moiety. Upon reaction with H₂S, accompanied by the cleavage of 4-azidobenzyl group from the probe molecule, the long-lived emission of Tb³⁺ complex at 540 nm is significantly enhanced, while that of Eu³⁺ complex at 610 nm is obviously reduced. It was noted that the I₅₄₀/I₆₁₀ ratio increased by 8.8 times after the probe was exposed to H₂S, which enabled H₂S to be detected with RM-TGL method. After being incubated with living cells, the probe molecules were selectively accumulated in the Golgi apparatus, which allowed H₂S in the Golgi apparatus to be successfully imaged in RM-TGL mode.     

Tunable magnetophoretic method for distinguishing and separating wear debris particles in an Fe-PDMS-based microfluidic chip

Wear debris analysis provides an early warning of mechanical transmission system aging and wear fault diagnosis, which has been widely used in machine health monitoring. The ability to detect and distinguish the ferromagnetic and nonmagnetic debris in oil is becoming an effective way to assess the health status of machinery. In this work, an Fe-poly(dimethylsiloxane) (PDMS)-based magnetophoretic method for the continuous separation of ferromagnetic iron particles by diameter and the isolation of ferromagnetic particles and nonmagnetic particles with similar diameter by type is developed. The particles experience magnetophoretic effects when passing through the vicinity of the Fe-PDMS where the strongest gradient of the magnetic fields exists. By choosing a relatively short distance between the magnet and the sidewall of the horizontal main channel and the length of Fe-PDMS with controlled particles flow rate, the diameter-dependent separation of ferromagnetic iron particles, that is, smaller than 7 µm, in the range of 8–12 µm, and larger than 14 µm, and the isolation of ferromagnetic iron particles and nonmagnetic aluminum particles based on opposite magnetophoretic behaviors by types are demonstrated, providing a potential method for the detection of wear debris particles with a high sensitivity and resolution and the diagnostic of mechanical system.     

Medical radioisotope 89Zr production with RFT-30 cyclotron

Journal of Radioanalytical and Nuclear Chemistry - 89Zr is an emerging radionuclide with promising application in nuclear medicine for the non-invasive diagnosis of various cancers with PET...     

Bacteria and cancer cell pearl chain under dielectrophoresis

In this work, we aim to observe and study the physics of bacteria and cancer cells pearl chain formation under dielectrophoresis (DEP). Experimentally, we visualized the formation of Bacillus subtilis bacterial pearl chain and human breast cancer cell (MCF-7) chain under positive and negative dielectrophoretic force, respectively. Through a simple simulation with creeping flow, AC/DC electric fields, and particle tracing modules in COMSOL, we examined the mechanism by which bacteria self-organize into a pearl chain across the gap between two electrodes via DEP. Our simulation results reveal that the region of greatest positive DEP force shifts from the electrode edge to the leading edge of the pearl chain, thus guiding the trajectories of free-flowing particles toward the leading edge via positive DEP. Our findings additionally highlight the mechanism why the free-flowing particles are more likely to join the existing pearl chain rather than starting a new pearl chain. This phenomenon is primarily due to the increase in magnitude of electric field gradient, and hence DEP force exerted, with the shortening gap between the pearl chain leading edge and the adjacent electrode. The findings shed light on the observed behavior of preferential pearl chain formation across electrode gaps.     

Cobalt and nitrogen atoms co-doped porous carbon for advanced electrical double-layer capacitors

Electrical double-laye r capacitors are widely concerned fo r their high power density,long cycling life and high cycling efficiency.However,their wide application is limited by their low energy density.In this study,we propose a simple yet environmental friendly method to synthesize cobalt and nitrogen atoms co-doped porous carbon(CoAT-NC) material.Cobalt atoms connected with primarily pyridinic nitrogen atoms can be uniformly dispersed in the amorphous carbon matrix,which is benefit for improving electrical conductivity and density of states of the carbon material.Therefore,an enhanced perfo rmance is expected when CoAT-NC is served as electrode in a supercapacitor device.CoAT-NC displays a good gravimetric capacitance of 160 F/g at 0.5 A/g combing with outstanding capacitance retention of 90% at an extremely high current density of 100 A/g in acid electrolyte.Furthermore,a good energy density of30 Wh/kg can be obtained in the organic electrolyte.     

Sarcaglarols A—D,Lindenane−Monoterpene Heterodimers from Sarcandra glabra Based on Molecular Networks

Sarcaglarols A—D ( 1 — 4 ), two pairs of lindenane?monoterpene heterodimers fused by a 1,2‐dioxane moiety, were discovered and isolated from the leaves of Sarcandra glabra guided by MS/MS molecular networking‐based strategy. Their planar structures, absolute configurations of basic skeleton and flexible polyhydric side chain were established by analysis of HRESIMS, NMR spectroscopic data, ECD spectrum, and the X‐ray diffraction study of isopropylidene derivatives. An intermolecular [2+2+2] cycloaddition may play a key role in the biosynthesis pathway of the 1,2‐dioxane moiety fused lindenane?monoterpene heterodimer skeleton, which can be recognized as the biogenetic precursors of our previous reported lindenane?normonoterpene conjugates. In addition, compounds 1 , 3 and 4 exhibited moderate inhibitory effects of lipid accumulation in free fatty acid‐exposed L02 cells.     

大孔高镍LiNi0.8Co0.1Mn0.1O2正极材料的制备及其电化学性能研究

本工作以聚甲基丙烯酸甲酯(PMMA)微球组装成的胶晶模板作为铸模, 溶胶-凝胶法辅助获得大孔LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811)正极材料. 结果表明, 利用PMMA作为造孔剂, 形成了由100 nm的颗粒堆积而成的大孔结构, 这种结构有效地提高了材料的倍率性能和循环稳定性. 大孔NCM811在0.1C的首次放电比容量为190.3 mAh∙g^-1. 2C倍率下NCM811纳米颗粒的放电比容量仅为129.3 mAh∙g^-1, 而大孔NCM811的放电比容量为149.8 mAh∙g^-1. 0.5C倍率下循环400次后大孔NCM811的容量保持率为83.02%, 明显高于纳米颗粒材料的38.59%.     

Metabolome Analysis of Selective Inactivation of Human Melanoma and Normal Cells by Cold Atmospheric Plasma

Plasma Chemistry and Plasma Processing - Cold atmospheric plasma (CAP) is a novel technology which is widely used in the biomedical field and has developed quickly over the past few years,...     

Surface modification of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane in supercritical carbon dioxide for enhancing interfacial strength

PBO fiber is one of the most promising reinforcements in resin matrix composite because of its excellent mechanical properties. However, the inert and smooth surfaces make it the poor interface adhesion with resin matrix, which seriously limits the application in composites. In this article, we report a method to modify the surface of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane（BisAPAF）in supercritical CO₂ to enhance interfacial properties. Chemical structures, surface elemental composition and functional groups, and surface morphology were characterized by FT-IR spectrometer, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), respectively. The mechanical properties of the samples were tested by a tensile tester. Static contact angle and microdebonding tests were used to characterize the wetting ability and interfacial shear strength (IFSS) of the fiber and epoxy resin. The results showed that the BisAPAF could be solved in scCO₂ and introduced more groups, –NH₂, –OH, and –CF₃ on the fiber surface, resulting in the mechanical properties and the wettability of PBO fiber slightly improved. Moreover, the fiber surface roughness was also increased obviously. The IFSS between the modified PBO fiber and epoxy resin increased from 8.18 MPa to 31.4 MPa when the treating pressure was 14 MPa. In general, the method to modify PBO fibers surface using BisAPAF in scCO₂ can effectively improve their interfacial properties.